Smokecloak Accessories
VM4-120V.2 Voice Module
|
Info or Demonstration |
 |
The Unique built in VM4 Voice/Siren module is pre-programmed with 2 voice messages and sirens which complies and satisfies local Authorities concerns
and is a requirement to be installed with every Smoke Cloak Installation.
APPLICATION:
The VM4-120 v.2 features 4 channels that can be configured as 2 channels of siren and 2 channels of voice, or all 4 channels can be used for voice. Either way the voice channels are fully recordable and are stored in non-volatile memory.
 |
Standard Message
|
|
|
Panic Message
|
Four Channels Configurable as: Two Siren and Two Recordable Voice OR Four Recordable Voice.
Maximum record time is 8 minutes divided between the number of voice channels.
Siren Sounds:
Classic Yelp Siren, Temporal Coded Horn, and Pulsing Industrial Horn .
Temporal Coded Horn meets ANSI standard for Audible Emergency Evacuation Signaling.
Features..
- Recordings stored in non-volatile memory.
- Voice channels accept momentary triggers.
- "One Shot" or Continuous voice playback settings.
- Built-in condenser microphone for recording.
- Adjustable speaker volume and current draw.
- Powerful 24 watt audio amplifier for Speakers.
- Line Level Output for Paging Systems and Amplifiers
- PC sound card interface connector.
- Lifetime Limited Warranty, call for details.
Product specifications:
Operating Voltage: 11 to 14 Volts D.C.
Adjustable current draw: 1/4 to 1.8 Amps.
Low current triggers: 9 to 14 Volts DC @ 30 mA.
Maximum sound level: 122 dB @ 1 meter.
Maximum speaker loading: 4 Ohms.
Pulsing input: 1/2 to 1.5 Sec Pulse, 50% duty cyde.
Size: 3" x 5" x 1.25" (76 x 127 x 32 mm).
Features and Specifications subject to change without notice.
|
